Environmental Chambers
Percival Scientific Plant Tissue Culture Chamber, CU36L5, 29.7 cu. ft., low heat PetriClear LED lighting, condensation reducing airflow, 5 tiers, 10-44° C ±0.5°, IntellusUltra controller
The CU36L5 chamber is optimized for plant tissue culture in plates, dishes or flasks. PetriClear LEDs are dimmable from 10-100% output with up to 170 µmoles/m2/s irradiance @ 6" from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Specially designed airflow insulates shelf level experiments from heat generated by the underlying light fixture. Five tiers of epoxy coated steel wire shelving slide in and out easily on stainless steel rail assemblies. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs compressor life, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for additional options.
Percival Scientific Algae Growth Chamber, AL41L4, 37.2 cu. ft.,SciWhite LEDs, 4 tiers, 7-44° C ±0.5°, IntellusUltra controller, touchscreen interface
The AL41L4 algae chamber used for algae with higher light intensity, and short plants with moderate light intensity. SciWhite LEDs are dimmable between 10-100% in 1% increments output with up to 405 µmoles/m2/s light irradiance @ 6”. IntellusUltra controller, touchscreen interface. Interior/exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation, stainless-steel floor for corrosion resistance. Conditioned air circulates through rear wall plenum, travels horizontally across each shelf; then vertically upward to unit cooler. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Darwin Chambers Company Environmental Chamber 29.75""W x 23""D x 27.75""H.
The KB011 is a 11.6 cubic feet bench top environmental chamber. Temperature range is 2 to 50 degrees C. Humidity range ambient to 90 percent. This unit comes with 2 stainless steel shelves. The chamber provides 304 series stainless steel interior and door liner, corrosion-resistant; also a heavy-gauge powder-coated, galvanized steel exterior. The KB series chambers feature hot gas by-pass technology which controls the temperature of the epoxy coated evaporator for greater uniformity. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers.
Darwin Chambers Company CHAMBER INSECT 70 CU FOOT
The IN084 is a 76.2 cubic foot triple door insect rearing chamber. Temp range is 18 to 60 deg C. Optional humidity range ambient to 90%. Humidity and lighting options not included. Must be ordered separately. This unit comes w/ 9 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior & stainless steel floor w/ coved corners. The 7 year warranty on cooling components & the ability of our chambers to maintain temp. even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The IN Series chambers utilize less energy than comparable insect rearing chambers.
Darwin Chambers Company Single Door ICH Stability Chamber 21 cu. ft.
The PH030 is a 23.9 cubic ft single door stability chamber. These Chambers are designed for performance specifications exceeding FDA & ICH requirements. Temperature range is 18°C to 50°C degrees C. Humidity range ambient to 90 percent. This unit comes w/ three pvc coated shelves. The chamber interior provides aluminum side walls & back, stainless steel floor & ceiling. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. The 7 year warranty on cooling components & the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The PH Series chambers utilize less energy than comparable stability chambers.
Percival Scientific Drosophila Incubator, DR36NLH3, 29.7 cu. ft., non-lighted, 6 tiers, pan-type hum., dehum. and standard sensor, coated coils, 2-44° C ±0.5°, IntellusUltra controller
The DR36NLH3 incubator is designed with features for optimal rearing of Drosophila melanogaster. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. A phenolic coated coil prevents waste damage. Pan-type humidifier and dehumidifier keep media from drying out and maintains optimal humidity. Six white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for more options.
Percival Scientific SciBriteLED Chamber, LED30L1C9, 9.6 cu. ft., 1 tier of 4-color LEDs including red, blue, white, and far red, 10-44° C ±0.5°, IntellusUltraConnect controller, touchscreen interface
The LED36L1C9 SciBrite LED chamber is specifically designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. One tier of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable from 1-100% output in 1% increments with up to 1550 µmoles/m2/s irradiance @ 6". Upgraded IntellusUltraConnect controller with touchscreen interface. Remote connectivity. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. One epoxy coated steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific Plant Growth Chamber, E36L1H12, 29.7 cu. ft., SciWhite with red LEDs, 1 tier,, 7-44° C ±0.5°, IntellusUltra controller, touchscreen, advanced ultrasonic humidifier, dehumidifier
The E36L1H12 growth chamber is frequently used for rice, cotton or short/medium height plants. SciWhite w/ red LEDs are dimmable from 10-100% output w/ up to 680 µmoles/m2/s irradiance @ 6". IntellusUltra controller, touchscreen, advanced ultrasonic humidifier and dehumidifier. Interior/exterior of smooth white galvanized steel w/ foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Air circulation inside chamber is from a specifically designed adjustable air diffuser. One epoxy coated steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit w/ hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternating refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for more options.
Percival Scientific Algae Growth Chamber, AL30L2H11, 9.9 cu. ft.,SciWhite LEDs, 2 tiers, 7-44° C ±0.5°, IntellusUltra controller, touchscreen, advanced additive ultrasonic humidifier
The AL30L2H11 algae chamber used for algae with higher light intensity, and short plants w/ moderate light intensity. SciWhite LEDs are dimmable between 10-100% output with up to 440 µmoles/m2/s light irradiance @ 6”. Standard IntellusUltra controller, touchscreen, Advanced additive ultrasonic humidifier. Interior/exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation, stainless-steel floor for corrosion resistance. Conditioned air circulates through rear wall plenum, travels horizontally across each shelf; then vertically upward to unit cooler. Two white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific SciBrite LED Chamber, LED36L1, 29.7 cu. ft., 1 tier of 4-color LEDs including red, blue, white, and far red, 10-44° C ±0.5°, IntellusUltra controller, touchscreen interface
The LED36L1 SciBrite LED chamber is specifically designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. One tier of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable from 1-100% output in 1% increments with up to 1550 µmoles/m2/s irradiance @ 6". IntellusUltra control system with touchscreen interface. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. One white epoxy coated steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific Algae Growth Chamber, AL41L4H14, 37.2 cu. ft.,SciWhite LEDs, 4 tiers, 7-44° C ±0.5°, IntellusUltra controller, touchscreen, standard additive ultrasonic humidifier
The AL41L4H14 algae chamber used for algae with higher light intensity, and short plants with moderate light intensity. SciWhite LEDs are dimmable between 10-100% output with up to 405 µmoles/m2/s light irradiance @ 6”. IntellusUltra controller, touchscreen, standard additive ultrasonic humidifier. Interior/exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation, stainless-steel floor for corrosion resistance. Conditioned air circulates through rear wall plenum, travels horizontally across each shelf; then vertically upward to unit cooler. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific SciBrite LED Chamber, LED36L1H15, 29.7 cu. ft., 1 tier of 4-color LEDs, 10-44° C ±0.5°, IntellusUltra controller, touchscreen, standard ultrasonic humidifier and dehumidifier
The LED36L1H15 SciBrite LED chamber is designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. One tier of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable from 1-100% output with up to 1550 µmoles/m2/s irradiance @ 6". IntellusUltra control system with touchscreen interface. Ultrasonic humidifier, dehumidifier, with standard humidity sensor. Interior/exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor. One white epoxy coated steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific SciBrite LED Chamber, LED30L1H14, 9.6 cu. ft., 1 tier of 4-color LEDs, 10-44° C ±0.5°, IntellusUltra controller, touchscreen, standard additive ultrasonic humidifier
The LED30L1H14 SciBrite LED chamber is specifically designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. One tier of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable from 1-100% output with up to 1400 µmoles/m2/s irradiance @ 6". IntellusUltra control system with touchscreen interface. Ultrasonic humidifier and standard humidity sensor. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. One shelf adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.